The microstructure evolution in the weld zone of double-side friction stir welded（DS-FSWed） 7085-T7452 Al alloy was investigated by the electron backscatter diffraction method.The results indicate that DS-FSW process results in substantial grain refinement.The misorientation angle distribution shows a very high volume fraction of high angle grain boundary（HAGB）（above 75%） under DS-FSW condition at rotational rate of 300 r/min.The fraction of HAGB rapidly decreases with increasing the rotational rate from 300 to 950 r/min,and the obvious growth of grain in the weld nugget zone（WNZ） is presented.The average grain sizes in the elongated grains of thermal-mechanical affected zone（TMAZ） and partially equiaxed and coarser grains of thermal affected zone（HAZ） are 7.3 and 15.7 μm with the fractions of HAGBs less than 43% and 30%,respectively.The intensities of（100）,（110） and（111） pole figures in the WNZ obviously decrease when compared with those in the BM and present significantly difference along the thickness direction of plate.
