An investigation has been conducted to quantify the effect of waterway geometry on the form and magnitude of forces and moment experienced by a berthed ship due to a passing ship.By using the dynamic mesh technique and solving the unsteady RANS equations in conjunction with a RNG k？ε turbulence model,numerical simulation of the three-dimensional unsteady viscous flow around a passing ship and a berthed ship in different waterway geometries is conducted,and the hydrodynamic forces and moment acting on the berthed ship are calculated.The proposed method is verified by comparing the numerical results with existing empirical curves and a selection of results from model scale experiments.The calculated interaction forces and moment are presented for six different waterway geometries.The magnitude of the peak values and the form of the forces and moment on the berthed ship for different cases are investigated to assess the effect of the waterway geometry.The results of present study can provide certain guidance on safe maneuvering of a ship passing by a berthed ship.
A CFD method is used to numerically predict the hydrodynamic forces and moments acting on a ship passing through a lock with a constant speed. By solving the RANS equations in combination with the RNG k-e turbulence model, the unsteady viscous flow around the ship is simulated and the hydrodynamic forces and moments acting on the ship are calculated. UDF is com-piled to define the ship motion. Meanwhile, grid regeneration is dealt with by using the dynamic mesh method and sliding interface technique. Under the assumption of low ship speed, the effects of free surface elevation are neglected in the numerical simulation. A bulk carrier ship model is taken as an example for the numerical study. The numerical results are presented and compared with the available experimental results. By analyzing the numerical results obtained for locks with different configurations, the influences of approach wall configuration, lock configuration symmetry and lock chamber breadth on the hydrodynamic forces and moments are demonstrated. The numerical method applied in this paper can qualitatively predict the ship-lock hydrodynamic interaction and pro-vide certain guidance on lock design.
While passing through a lock, a ship usually undergoes a steady forward motion at low speed. Owing to the size restriction of lock chamber, the shallow water and bank effects on the hydrodynamic forces acting on the ship may be remarkable, which may have an adverse effect on navigation safety. However, the complicated hydrodynamics is not yet fully understood. This paper focuses on the hydrodynamic forces acting on a ship passing through a lock. The unsteady viscous flow and hydrodynamic forces are calculated by applying an unsteady RANS code with a RNG k-e turbulence model. User-defined function （UDF） is compiled to define the ship motion. Meanwhile, the grid regeneration is dealt with by using the dynamic mesh method and sliding interface technique. Numerical study is carried out for a bulk carrier ship passing through the Pierre Vandamme Lock in Zeebrugge at the model scale. The proposed method is validated by comparing the numerical results with the data of captive model tests. By analyzing the numerical results obtained at different speeds, water depths and eccentricities, the influences of speed, water depth and eccentricity on the hydrodynamic forces are illustrated. The numerical method proposed in this paper can qualitatively predict the ship-lock hydrodynamic interaction. It can provide certain guidance on the manoeuvring and control of ships passing through a lock.
